Sandblasting and powder coating are two processes that go hand in hand in their use in the modern world. Both processes are used for residential, commercial, as well industrial applications. Their popularity seems to grow by day, as more industrial, commercial, and residential applications find use for them. In effect, the industry is growing huge and wide, with a great future ahead. When in search of Sandblasting and powder coating Los Angeles should be given priority.
Today, powder coating is one of the most widely used finishing methods in use. This technique is the same as painting only that it uses a powdery substance in the place of paint. There is no need for a liquid solvent because it is not needed. It presents many benefits to users that make it popular and preferable. Thus, it has a bright future, which makes it worthwhile to adopt.
The process of applying powders is completed in 3 steps. First, the surface to be coated is prepared in advance. Secondly, the actual application of the powders takes place. The third and final step involves curing the surface or work substrate. Every step is a process in its own capacity and therefore requires thorough preparation and expertise to handle correctly.
Step one which involves preparation of the surface is where sandblasting is widely applied. This process involves directing or forcing abrasive material such as water as high pressure towards a surface in order to either etch or clean it. The purpose of sandblasting is to clean and not to etch in powder coating. The water used can have an abrasive material added for purposes of improving its cleaning ability. The cleaning can be even more effective if detergents are added.
Sandblasting can be used for the removal of a wide range of materials, including dust, grease, oil, mold, mud, and graffiti among many others. However, sand blasting cannot remove all substances. As such, it is important to ensure that the substance that is being removed or cleaned can actually be removed by sandblasting. If not, then one should find another more appropriate method. It is also possible to use multiple methods, with sand blasting being one of them.
Powder application is only done after the surface has been cleaned sufficiently. A special piece of equipment is used in the application process. The application may be done in an oven or not. Neutralization of the substrate is done first before the process begins. That is important so that charged particles of powders can be attracted to the substrate.
At the beginning of the process, the charged powder particles move towards and get attracted to the substrate resulting into a thin coating forming over the surface. The powder particles are made in all sorts of colors giving users a wide range to pick from. The powders can be computer-mixed to attain any color that the user wishes to have.
Usually, the coat of powder that forms on the substrate is only loosely attached. Curing must be done before it can become more permanent. Curing is done under very high temperatures in a special oven. The high temperatures melt the film, causing it to form a tough, yet smooth coating that can resist wear and tear for many years.
Today, powder coating is one of the most widely used finishing methods in use. This technique is the same as painting only that it uses a powdery substance in the place of paint. There is no need for a liquid solvent because it is not needed. It presents many benefits to users that make it popular and preferable. Thus, it has a bright future, which makes it worthwhile to adopt.
The process of applying powders is completed in 3 steps. First, the surface to be coated is prepared in advance. Secondly, the actual application of the powders takes place. The third and final step involves curing the surface or work substrate. Every step is a process in its own capacity and therefore requires thorough preparation and expertise to handle correctly.
Step one which involves preparation of the surface is where sandblasting is widely applied. This process involves directing or forcing abrasive material such as water as high pressure towards a surface in order to either etch or clean it. The purpose of sandblasting is to clean and not to etch in powder coating. The water used can have an abrasive material added for purposes of improving its cleaning ability. The cleaning can be even more effective if detergents are added.
Sandblasting can be used for the removal of a wide range of materials, including dust, grease, oil, mold, mud, and graffiti among many others. However, sand blasting cannot remove all substances. As such, it is important to ensure that the substance that is being removed or cleaned can actually be removed by sandblasting. If not, then one should find another more appropriate method. It is also possible to use multiple methods, with sand blasting being one of them.
Powder application is only done after the surface has been cleaned sufficiently. A special piece of equipment is used in the application process. The application may be done in an oven or not. Neutralization of the substrate is done first before the process begins. That is important so that charged particles of powders can be attracted to the substrate.
At the beginning of the process, the charged powder particles move towards and get attracted to the substrate resulting into a thin coating forming over the surface. The powder particles are made in all sorts of colors giving users a wide range to pick from. The powders can be computer-mixed to attain any color that the user wishes to have.
Usually, the coat of powder that forms on the substrate is only loosely attached. Curing must be done before it can become more permanent. Curing is done under very high temperatures in a special oven. The high temperatures melt the film, causing it to form a tough, yet smooth coating that can resist wear and tear for many years.
About the Author:
You can find a detailed overview of the benefits and advantages of using professional sandblasting and powder coating Los Angeles services at http://www.masterpowdercoating.com/sandblast.html right now.
Aucun commentaire:
Enregistrer un commentaire