dimanche 18 septembre 2016

Knowing About Awning Hand Crank Replacement Ways

By Mark Wagner


Awning windows have built in cranks used for opening and closing it. There are possibilities that anytime, it might break and wear out, thus, leaving it opened or closed in position. Prompt repair should be done when this happens.

Many home owners already know how awning windows are to be repaired. But unfortunately, most of them do not know how it works and on how it is to be maintained. So this article will give you ideas on awning hand crank replacement. Tools that are to be used in for replacement are available in many local hardware stores.

Most of these windows are being mounted on top of the window frame. From the top, it is opened outwards. The advantage of this is it may be mounted on high walls, and still provides great functions. And due to its shape, ventilation will pass by from the bottom. If a window is near the ceiling, it would give a better ventilation while providing privacy because of height.

But its best advantage is you can leave it opened. While it is raining, it can be left open while not letting in the rain. So this could be perfect for those people who loves opening the windows on a rainy season. This also looks modern so it is perfect. And if you want some proof of how it really looks, browse on the internet and search for images.

So when replacing an awning window crank, first thing to do is to identify the screws that are holding the crank in place. With the use of a screw driver, loosen the screws by turning it in a counterclockwise rotation. And after removing the screws, lift the panel open outside.

While you are outside, detach all the clips that hold the lever of the crank from the window through the use of needle nose pliers or small screw drivers. When the clips are already removed, the lever slips off from the post easily. Go back inside the house and try to remove the crank. In installing a new crank, do these steps in reverse. And one reminder is do not forget to bought extra clips in case some parts of these will be lost during the repair.

Maintaining its work order is very important, so lubricate and clean it regularly. Do this while not yet being assembled. You may use wire brush for scraping the rust and toothbrush for scrubbing the gears with cleaning fluid. Use also a cleaning fluid when cleaning the arms.

In order for the mechanism and the arm to be lubricated, a car grease can be very effective. Do not forget to wear a rubber gloves because a grease is messy. For window cranks to be smooth and effective in its operation, always take care for it regularly.

In spite of the advantages stated above, these also have some drawbacks. One of which is the cost. These are more expensive compared to some other alternatives. The hardware used usually cost prohibitive. Another drawback is it is restrictive. There are manufacturers that have some restrictions when it come to the size. They may only allow 3 feet wide and not more than 2 feet tall.




About the Author:



Aucun commentaire:

Enregistrer un commentaire