An awning is attached to a frame construction with covering, it serves as sun, rain, heat, glare and property protection. Awnings New Jersey fall within the range of roller shutter, blinds and sun protection apparatus. A distinction is made between three types of awnings. The roll shade, in which the fabric can be rolled up on a canvas shaft, the folding version is moveable but has no roller tube and the fixed canopy cannot be adjusted.
The cloth shaft is protected by a kind of aluminum sleeve, while the articulated arms are exposed under the sleeve. The canopy is driven either via a gearbox which is moved by a connecting rod or tube inserted into the shaft. In the latter case, wind, sun and even rain sensors can be integrated for secure and automatic operation. User control can also be realized wirelessly using Wi-Fi and smartphone.
The sun shelter is screwed on consoles with the masonry or other supporting structure (rafters, balcony slab, etc.). The visor arm must be retracted (by wind or rain monitor), it may be damaged due to the leverage effect. If used as rain gear, the pitch must be set (at least 15 degrees) so that puddles cannot form, they are capable of damaging due to weight and masonry leverage.
Special rain canopies are designed so that they provide protection even at lower inclination (less than 15 degrees) for a safe and efficient drainage. With these models, it is necessary to pay attention to the manufacturer's instructions, particularly if a water pocket formation is excluded. Nearly all blinds can be fastened both to a wall and a ceiling (e. G, balcony).
The canopy fabric might be impaired because the seams would be heavily burdened with large inclination angles. The sun shelter can be operated electrically by means of a roller tubular motor or manually through the gearbox and crank. The case or vertical sun shelter is similar to the drop arm model, with the only difference that the cloth is guided by ropes or rods, vertically running down.
Ruffles sewn from fabric panels and/or with binding tape should not be washed in the washing machine, even if this is actually possible. The seams are destroyed and stain-resistant coating removed. With some water and a soft detergent to stains can brush off without damaging the wheel.
The arms are set with steel or gas pressure springs under tension, they press the cloth when extending outward and hold it tight. During retraction, the spring force must be counteracted. Therefore, the retraction requires more effort than the extension. Canopies are mainly used as solar and heat protection in both the private and commercial sector. Due to their construction, they extend only up to a certain limit, (up to 400 cm).
A tension sun shelter has a sail guided by running hook and suspended from stainless steel cables. The solar panels are tensioned between two parallel stainless steel wires slightly displaced laterally. An oblique suspension of the sail (ropes stretched at different heights) also allows it to function as protection from rain. The sail can also be perpendicular to a stainless steel rope above.
The cloth shaft is protected by a kind of aluminum sleeve, while the articulated arms are exposed under the sleeve. The canopy is driven either via a gearbox which is moved by a connecting rod or tube inserted into the shaft. In the latter case, wind, sun and even rain sensors can be integrated for secure and automatic operation. User control can also be realized wirelessly using Wi-Fi and smartphone.
The sun shelter is screwed on consoles with the masonry or other supporting structure (rafters, balcony slab, etc.). The visor arm must be retracted (by wind or rain monitor), it may be damaged due to the leverage effect. If used as rain gear, the pitch must be set (at least 15 degrees) so that puddles cannot form, they are capable of damaging due to weight and masonry leverage.
Special rain canopies are designed so that they provide protection even at lower inclination (less than 15 degrees) for a safe and efficient drainage. With these models, it is necessary to pay attention to the manufacturer's instructions, particularly if a water pocket formation is excluded. Nearly all blinds can be fastened both to a wall and a ceiling (e. G, balcony).
The canopy fabric might be impaired because the seams would be heavily burdened with large inclination angles. The sun shelter can be operated electrically by means of a roller tubular motor or manually through the gearbox and crank. The case or vertical sun shelter is similar to the drop arm model, with the only difference that the cloth is guided by ropes or rods, vertically running down.
Ruffles sewn from fabric panels and/or with binding tape should not be washed in the washing machine, even if this is actually possible. The seams are destroyed and stain-resistant coating removed. With some water and a soft detergent to stains can brush off without damaging the wheel.
The arms are set with steel or gas pressure springs under tension, they press the cloth when extending outward and hold it tight. During retraction, the spring force must be counteracted. Therefore, the retraction requires more effort than the extension. Canopies are mainly used as solar and heat protection in both the private and commercial sector. Due to their construction, they extend only up to a certain limit, (up to 400 cm).
A tension sun shelter has a sail guided by running hook and suspended from stainless steel cables. The solar panels are tensioned between two parallel stainless steel wires slightly displaced laterally. An oblique suspension of the sail (ropes stretched at different heights) also allows it to function as protection from rain. The sail can also be perpendicular to a stainless steel rope above.
Aucun commentaire:
Enregistrer un commentaire